![rcf rdnet control 2 rcf rdnet control 2](https://kalmanmusic.ro/media/catalog/product/cache/image/e9c3970ab036de70892d86c6d221abfe/0/0/002_control_2_left_gallery.jpg)
RDNET CONTROL 2 is an hardware interface to connect RCF RDNET compatible devices to a. RDNet is available in the RCF TT+ Theater and Touring Series, as well as the new HDL50-A large format line array. The key point of RDNet Control 8, in fact, is to ensure minimum refresh time (at least 5 per second) of all the system data performance, for example: RMS signals, compressor activity, temperature, fans speed, warnings, etc. will not assume any responsibility for the incorrect. The RDNet Control 2 is a two-channel unit that controls up to 64 devices, while the RDNet Control 8 is an eight-channel model that controls up to 256 devices in its subnet. The interface can be directly connected to the DSP on board of every TT+ line array module through the exclusive RDNet protocol making it possible to address in single cabinets or groups, specific presets or modification parameters in real-time. All the data collected from the slaves are delivered to the sound engineer by USB in a local installation or by Ethernet from remote locations. Only a single Control2 can be linked to a computer. It is directly powered from the computer (through USB), so it does not need any external adapter. It is possible to link up to 32 devices to each port (max. The RDNet Control 8 is a real-time monitor and control system able to manage up to 256 devices linked in a bus or up to 128 devices in a ring topology. RdNet Control2 is a two-port self-powered USB interface. Storing subnet user filters configuration in a removable memory card.Monitoring and displaying faults and warnings sent from slave devices.Controlling slave devices status and functions.ALL DEVICES ARE CYCLICALLY SCANNED ("POLLING") 10 TIMES A SECOND.CONTROL UP TO 8 SUB-NETS OF UP TO 32 SLAVE DEVICES.
Rcf rdnet control 2 Pc#
![rcf rdnet control 2 rcf rdnet control 2](https://static.bhphoto.com/images/fb/1546122.jpg)
The RDNET system was purposely developed to create a data network for monitoring and command of more systems. The network and devices configuration can be saved as file in the PC and later reloaded. RDNET CONTROL 2 is an hardware interface to connect RCF RDNET compatible devices to a Personal Computer (PC) by means of an USB connection. From PC it is possible to check the operating of each single device connected to the network and edit its parameters output level, mute, equalization, delay, etc.
Rcf rdnet control 2 install#
For the RDNET network operating, it is necessary to install the appropriate Software on PC, on Microsoft Windows® environment. Each device is assigned a unique address during the power on procedure of network. The addressing of the various devices is handled automatically by RDNet Control 2 interface. Up to 32 devices can be connected to each subnet (2 subnets x 32 = total 64 devices). The RDNet Control 2 unit can manage up to 2 subnets. RCF RDNET Control 2 Array and Zones Grouping with multiple-type EQ, Bass Shaper and FiRPHASE EQ Auto Scan and complete monitoring Shape Designer Array. The RDNet system was purposely developed to create a data network for monitoring and command of more systems.
![rcf rdnet control 2 rcf rdnet control 2](https://eventelevator.de/wp-content/uploads/2020/11/rcf-rdnet-4-0-screenshot.jpg)
The RDNet Control 2 is an hardware interface to connect RCF RDNet compatible devices (TTL55-A, TT元3-A II, TT元1-A II, etc.) to a Personal Computer (PC) by means of an USB connection.